EPSITRON® COMPACT Power

Installation depth is often restricted for both building and industrial applications. DIN 43880 specifies built-in equipment dimensions for installation in distribution and meter boards. WAGO's COMPACT Power supply units meet these requirements with a height of just 55mm from upper-edge of carrier rail – width and profile also comply to this standard.

WAGO's compact but powerful 787-10xx Power Supplies (30W, 60W and 100W) provide 12 and 24VDC output voltage. Front-panel status indication, maintenance-free CAGE CLAMP^® connection, adjustable output voltage, constant current operation in case of overload, as well as overhead installation capability are only some of the benefits available to the user. Thus, WAGO's power supplies allow distributed control systems to be supplied in flat distribution boxes or operator panels.

All COMPACT Power supply units indicate output voltage availability via green LED operation indicator. This allows current operating status to be displayed at a glance.

High-performance

To supply capacitive loads (e.g., distributed control units or HMI devices) with higher inrush current, WAGO's COMPACT Power supply units feature constant current characteristic, while delivering 1.1 times the nominal rated current during overload. For low-ohm short circuits, the output voltage is reduced to zero and automatically reinstated as soon as the short-circuit has been eliminated.

Tolerant supply

The wide range of input voltages of the COMPACT Power supply units allows feeds of 85 to 264VAC so devices can operate on different supply networks in Europe, America or Asia without additional conversion or setting. This feature increases tolerance of voltage fluctuations within a supply network, increasing reliability.