TOPJOB®S – Component Plugs

WAGO's TOPJOB^®S offers component plug versions that are suitable for either the jumper slot location or carrier terminal blocks.  The two contact locations of the component plugs offer screwless and solderless connection of a component or printed circuit board.

 

These component plugs can be used with diodes to protect against blacklash, LED's to provide status, resistors to convert signals or for leakage current, or even with customized circuits on a printed circuit board.

The 2002-800 component plug can be used with a TOPJOB^®S carrier terminal block (2002-1661 or 2002-1861).  The 2002-800 is an empty component plug (5.2mm wide) in which a component or printed circuit board can be inserted.  There are versions of the 2002-800/1000-xxx available with either LED’s or diodes already inserted.  Online Catalog

The 2002-810 component plug can be used with a TOPJOB^®S carrier terminal block (2002-1661 or 2002-1861).  The 2002-810 is an empty component plug (10.4mm wide) in which a component or printed circuit board can be inserted.   Online Catalog

The 2002-820 component plug can be used with two adjacent TOPJOB^®S carrier terminal blocks (2002-1661 or 2002-1861).  The 2002-810 is an empty component plug (10.4mm wide) in which a component or printed circuit board can be inserted.   Online Catalog

The 2002-880 component plug inserts into the jumper location of two adjacent TOPJOB^®S terminal blocks.  The 2002-880 is an empty component plug (10.4mm wide) in which a component or printed circuit board can be inserted.  There are versions of the 2002-880/1000-xxx available with either LED’s or diodes already inserted.  Online Catalog