TOPJOB® S - Simply push-in
For solid conductors or fine-stranded conductors with ferrules.
Stripped solid conductors, stranded conductors with ferrules, or ultrasonically “bonded” conductors are easily connected by simply pushing the wire into the wire entry.
For conductors rated 0.5mm2 (AWG 20) to 16mm2 (AWG 6) – this is a significant time and cost saving!
Wire connection using a screwdriver
Connecting stranded conductors without ferrules or small cross-sectional conductors that cannot be pushed in, is done similar to the original CAGE CLAMP®, using a screwdriver.
The smart feature
To open the clamp, the screwdriver is inserted from the vertical and the conductor entry is less than 15 degrees resulting in easier wiring.
Wire removal
The conductor is removed using a screwdriver, like the original CAGE CLAMP® .
Solid wires
Wire connection – Push-in connection
Solid wires ranging from at least two sizes below to one size above the rated cross section can be pushed in directly without tools.
Stranded conductors with ferrules
