Highlights
Since its market introduction in 1995, the WAGO-I/O-SYSTEM 750 has morphed into one of the most important modular fieldbus systems for industry, production and process automation. It enables the cost and space saving assembly of fieldbus nodes with free combination of digital, analog or complex modules. Increasing demands on machine and installation safety require again and again flexible and high-performing solutions!
Stepper controller
The WAGO-I/O-SYSTEM 750 expands by a complete system family. The terminals provide a number of practice-oriented features.
Temperature ranges from -20 °C to +60 °C
WAGO-I/O-SYSTEM 750 with an expanded temperature range from -20 °C to +60 °C.
Economical EEX i fieldbus technology
The WAGO-I/O-SYSTEM 750 can be operated as standard in potentially explosive areas up to zone 2; special bus terminals permit even the direct wiring into zones 1 and 0.
Bus terminals with pluggable wiring level
For certain applications, a pre-wiring of components, independent of the electronics, is appropriate. Furthermore, module exchanges without affecting the wiring are frequently requested, especially in safety-relevant applications.
AS interface in fieldbus node
Within a WAGO fieldbus node, inputs and outputs may be connected to a network, e.g., Ethernet or PROFIBUS, either directly or via an AS interface level.
DALi Award 2008