Fieldbus couplers, controllers

Adaptation to the fieldbus specified by the operator, by simple latching of the corresponding coupler or controller to the wired bus terminals: ETHERNET, PROFIBUS, INTERBUS, DeviceNet, CANopen, CAL, SDS, MODBUS, LONWorks®, CC-Link, Peer-to-Peer, LIGHTBUS, FireWireTM

I/O terminals

Free combination of digital and analog I/Os with different potentials, outputs, signals and special functions enable the design of customized fieldbus nodes.

I/O special terminals

Terminals with special functions: counters, pulse width, SSI sensor, incremental encoder, digial impulse interface, RS 232c, RS 485, TTY, S0, data exchange, AC/DC feeder, selectable with  fuse and diagnostics, potential multiplication, wildcard, distance.

PROFIsafe safety modules

The WAGO-I/O-SYSTEM 750 PROFIsafe modules are binary inputs and outputs as per IEC 61508 for the application on the PROFIBUS with PROFIsafe and they can be utilized without major modifications on the existing system of Series 750.

EEx i bus terminals

The direct application of fieldbus technology in potentially explosive areas is posible only with considerable efforts or limitations. With WAGO-I/O-SYSTEM 750, a system is available offering safe, easy and economical connections to the sensors and actuators in Zone 1 and 0, when installed in Zone 2.

System terminals

Terminal bus extension, termination and coupler terminals. Feeder terminals for the supply of the bus terminal with the corresponding supply potential. Filter modules for system and field supply. Potential multiplication terminal for multiple tapping of the supply voltage. Using distance terminals, fieldbus nodes can be visually divided in part areas.

Fieldbus plugs

Fieldbus plug with CAGE CLAMP® connector to PROFIBUS, CANopen, INTERBUS, CC-Link