Jumpers

Jumper adjacent terminal blocks using  simple push-in jumpers.

Slide the marking strip laterally to remove the jumper.

Power tap

The power tap provides a space saving and easy to install terminal for power distribution to additional loads.  Installed in the jumper slot, the power tap offers marking tag holder, built-in test point, as well as strain relief accessory.

Label

In addition to the WSB marking system, custom marking strips can also be used.

Conductor connection

Rotate screwdriver in counter-clockwise direction, and then push orange locking tab to hold clamp in open position using the latch.

Introduce stripped wire into the clamping unit up to the stop and hold it in position . . .

. . . unlock the latch through a quick counter-clockwise rotation 1. After the screwdriver automatically turns back, 2. the conductor is connected safely.