Multi-talented with high profile

The new six millimeter high WAGO isolating amplifiers and transducers not only have identical outlines but the commoning for the supply voltages etc. is always in the same position, allowing one type of in line jumper to be used for all modules.

This means for the user: simply commoning instead of wiring separately. The slightly lower relay modules fit in perfectly too. The relay modules are accessible from above and can be replaced easily.

In order to cover all application areas with one product family, it is intended to offer five different groups for the transducers alone: they include fixed and configurable isolating amplifiers, passive isolators, power supply isolators (also for HART applications), signal duplicators and temperature transducers for PT 100 and thermocouples.

The configuration can be done via the configuration software or the DIP switches. With that, it is possible to set 36 different combinations of signals for the isolating amplifiers, for example. Eight CAGE CLAMP® S connections can even cope with complex applications, such as electrically isolated 3- and 4-wire PT100 circuits, signal duplicators with 2 current outputs and 2-channel passive isolators.

In accordance with the various fields of application, the highest quality standards were required. The ambient operating temperature is from –25°C to +70°C, which at present is unrivalled in the field of transducers. All devices feature safe electrical isolation of input, output and supply circuit with 2.5kV test voltage acc. to EN 61140. The transmission error of the measuring data is under 0.1 %. The product range will be available during 1st quarter 2007.